7.
ALWAYS ensure the workplace is well lit. Ensure that ligh ng is placed so that
you will not be working in your own shadow.
Do not use tools in the presence of
fl
ammable liquids or gasses.
Stay alert, watch what you are doing, use common sense and do not operate
the tool when you are red.
8.
9.
CARE OF POWER TOOLS
1.
Read this manual carefully.Learn the machine applications and limitations,as
well as the speci
fi
c poten al hazards peculiar to it.
2.
ALWAYS keep guards in place and in working order. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service
centre, unless otherwise indicated in this instruc on manual.
3.
Remove any adjus ng keys or wrenches before star ng. Form the habit of
checking to ensure that keys, wrenches and tools are removed from the
machine.
4.
Don’t force the machine and use the correct tool. It will do the job be er
and safer, at the rate for which it was intended.
5.
ALWAYS disconnect the machine from the power supply before carrying out
any servicing or changing of accessories.
6.
Before further use of the tool, it should be carefully checked to determine
that it will operate properly and perform its intended func on. Check for
alignment of moving parts, binding of moving parts, breakage of parts,
moun ng or other condi on that may a
ff
ect its opera on.
7.
Have defec ve switches repaired by an authorized service centre. Do not
use a tool if the switch does not turn it on and o
ff
.
8.
ALWAYS check for any damage or any condi on that could a
ff
ect the
opera on of the machine. Damaged parts should be properly repaired.
9.
NEVER remove the cover panel unless the machine is disconnected from the
power supply, and never use the machine with cover panels removed.
10. Have your tool repaired by a quali
fi
ed person. This tool complies with the
relevant safety rules. Repairs should only be carried out by quali
fi
ed persons
using original spare parts, otherwise this may result in considerable danger
to the user.
11. NEVER use this product for any other purpose than that described in this
booklet.
12. NEVER abuse the power cable by yanking the cable to disconnect it from the
socket. Keep the cable away from heat, oil or sharp edges.
13. Guard against electric shock. Avoid body contact with earthed or grounded
surfaces.
14. If the tool should be used outdoors, use only extension cables intended for
outdoor use and marked accordingly.
15. Avoid accidental star ng by making sure the power switch is o
ff
before
plugging in the power cable.
3
Page 4
Instructions Manual for PD-440 (D598)
19/11/2015
