11
shaft and fatigue of spindle. If finding them, pls clean them and apply oil and adjust
spring to fittest.
5.
If the knee table slide carriage does not rise steadily with noise, the table is
steady, pls confirm wether wedge ship loose or not, and clean scrap iron, add oil
adjust wedge ship to fittest.
6.
If there is noise in gear box, pls stop machine immediately to conform the position
your require, then check that the oil meet standard.
7.
Prohibited maintaining the machine with electric.
NOTICE
I
:
The spindle box that transmitted by the belt can be surivled at 90
°
(by gear
±45
°
). When operating, pls loosen the three retaining but and pay attention these
nuts need only 1 pitch, then swivel screw lever by socket head screw wrench (s21-24)
to make the spindle box swivel to the place required (clockwise turn the nut, the
spindle box will cunter clockwise turn, or otherwise), while turning, pay attention to
the following item:
i
:
while the spindle box turn from horizontal position clined position to vertical
position pls help push the upper of spindle box and gently twitter it.
ii
while the spindle box turn from verival position to horizontal position or clined
position, pls push the upper of spindle box with hand and twitter it gently.
II
:
The rotary table (optional) can surivle at 45
°
when operate, first loose two screw
Summary of Contents for HM-53GV
