13
OPERATION MANUAL
4. Installing The Accessory Tools:
Attach the tool set to the back of the frame by using
M4X10 socket heat bolts. (Fig.3.7)
Secure the hook with hex nut to the end of the frame.
5. Installing The Rip Fence:
Place the rip fence onto the table, and secure it to the
guide rail.
Place the push stick onto the hook on the back of the
machine. (Fig.3.8)
NOTE:
Get into the habit of always replacing the push
stick on the hook after use
Fence
Push Stick
Fig. 3.7
Fig. 3.8
Tool Set
