Manager:
La
the Mill Drill (3 in 1)
D
MEDIUM
CUTTING, ST
ABBING,
Authorised and signed by:
Developed in Co-operation Between
A.W
.I.S.A
and
Australia Chamber of Manufactures
This program is based upon the Safe W
ork
Australia, Code of Practice - Managing Risks of Plant in the W
orkplace ( WHSA
201
1 No10 )
NEW
MACHINER
Y
HAZARD IDENTIFICA
TION,
ASSESSMENT & CONTROL
Always wear safety glasses.
H
ELECTRICAL
Safety of
ficer:
W
ear appropriate protective clothing to prevent hot swarf.
LOW
PLANT SAFETY
PROGRAM
No.
Hazard
Identification
Item
Hazard
Assessment
MEDIUM
O
N
C
HIGH -
TEMPERA
TURE
ENT
ANGLEMENT
PUNCTURING
SHEARING
Do not open or clean inside until the machine has completely stopped.
A
HIGH
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Isolate power to machine prior to any checks or maintenance.
Eliminate, avoid loose clothing / Long hair etc.
Isolate power to machine prior to any checks or maintenance.
Do not leave chuck key in chuck.
Make sure all guards are secured shut when machine is on.
MEDIUM
LOW
W
ear hearing protection as required.
F
STRIKING
MEDIUM
Ensure workpiece is secured in chuck and tooling is locked tight in toolpost.
Plant Safety Program to be read in conjunction with manufactures instructions
Remove all loose objects around moving parts.
All electrical enclosures should only be opened with a tool that is not to be kept with the machine.
Revised Date:
www
.machineryhouse.com.au
www
.machineryhouse.co.nz
12th March 2012
OTHER HAZARDS, NOISE.
Page 27
Instructions Manual for HM-32 (K012)
07/02/2018