24
9. TROUBLESHOOTING
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Whitish stains
remains
on dishes.
Not enough detergent used.
Use the correct amount of detergent, as
instructed in the programme table.
Rinse aid dosage and/or
water softener setting set
too low.
Increase rinse aid and/or water softener
level.
High water hardness level.
Increase water softerner level and add salt.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is
closed properly.
Dishes do not
dry.
Drying option is not
selected.
Select a programme with a drying option.
Rinse aid dosage set too
low.
Increase rinse aid dosage setting.
Rust stains
form on the
dishes.
Stainless-steel quality of the
dishes is insufficient.
Use only dishwasher-proof sets.
High level of salt in wash
water.
Adjust the water hardness level using water
hardness table.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is
closed properly.
Too much salt spilled in the
Dishwasher while filling it
with salt.
Use funnel while filling salt to the
compartment to avoid spillage.
A poor mains grounding.
Consult a qualified electrician immediately.
Detergent
remains in the
detergent
compartment.
Detergent was added when
the detergent compartment
was wet.
Make sure detergent compartment is dry
before use.
