OPERATION INSTRUCTION
Art No 836.28.380
Double mode: Hotel mode and Residential mode
Default Setting:
1. Factory default mode is Residential version
2. User Code (4-6 digits), factory setting: 1234 (this code is invalid once it is changed)
3. Master Code (6 digits) , factory setting: 888888 (this code is invalid once it is changed)
To open the door
First opening: install 4 AA batteries into the external battery holder, plug in the outlet
on the faceplate. Put your whole hand onto the keypad panel to activate the Touch
Keypad. Input factory default setting user code. The LED displayer will show OPEN
if the entry code is valid, then OPENED. The door will open automatically. E-CODE
means the code is wrong.
Remove the batteries from the external battery holder to the internal battery holder
on the back of the door.
To close the door
1. Hotel mode:
Put your whole hand onto the keypad panel to activate the Touch Keypad. Input any 4-6
digits and press #. The LED shows “CLOSE”
->
“CLOSED”.
Fast Close function: within 10 minutes after opening the door, if you shut the door and
press #, the door can be locked with the last code showed on LED displayer after that.
2. Residential mode:
Put your whole hand onto the keypad panel to activate the Touch Keypad. Shut the door
to close position and press #, the door will be closed.
Change code settings
1. Hotel mode:
The code that you input to close the door is THAT CODE to open the door.
2. Residential mode:
Remarks: under this mode, User Code and Master Code cannot be the same. When switch-
ing to Residential mode, User Code will be overwritten to 1234
When the door is OPEN, input correct User Code and press *. The LED shows “USEr”. Input
New User Code and press #. When “AGAIN”, please input New User Code again and press
#. “dONE” means the code-changing process is finished.
If 2 times of input with different code, it will show E-Code and you need to repeat the above
process again.
Under Residential mode, if User Code and Master Code is the SAME, it will also show
E-Code. Please change Master Code to another one, which is different from User Code.
Management Setting
It is the same in both Hotel mode and Residential mode: when the door is open, put
your whole hand onto the keypad panel to activate the Touch Keypad. Input correct
Master code and press *. When you see “NEU”, press number 0 and you can choose
between menu of “NEU” and “TyPE”. Choose any one of them and press # to go into
that menu.
1. Change Master Code
Press number 0 to choose “NEU” and press # to go into code changing menu. When
you see “BEGIN”, please input NEW Master Code (6 digits) and press #.
“AGAIN”-please input your NEW Master Code again. “dONE”-means the process is
finished.
1/4
2/4
