10
11
After setting the time and temperature, press the “switch” button, the electric heating
tube and the fan start to work, the power light stops flashing, the power light is always
on, the temperature and time display indicators are constantly on, and the time starts
counting down.
Note:
During the operation, press the “switch” button, the electric heating tube are sus-
pended, and the fan will be working 15 seconds. Press the “switch” button, and the fan
and the electric heating tube enter the working state again. After the motor is energized,
the fan light flashes in seconds, and when the heating tube is heated, the heating light is
on, and when it is not heated, it is off.
During operation, the door opens, the screen and power light are ON, and the heating
tube and fan stop working; the light is off after 3 minutes. Put it into the basket again
and continue to work in the original state (the countdown is unchanged, with power-off
memory function, the memory time is 2 hours). Press the “cage” button, the “cage” light
flashes, the cage starts to rotate, then press to stop, press the “illumination” button, the
illumination “key flashes, the light is on, but it goes out within one minute.
5. At the end of the work, the buzzer will sound 6 times continuously, the time will display
“00”, and it’s flash for twelve times. Open the door and take out the food with cage han-
dle or insulated gloves
Note:
During the hot air frying process, the heating-up light comes on and goes out from time to
time. This indicates that the heating element is switched on and off to maintain the set temperature.
Excess oil from the ingredients is collected on the bottom of the Slag tray
Note:
If you want to go to the air fryer oven and stop working, press and hold the “
“
button for 2 seconds. air fryer oven stop working.
6. Check if the ingredients are ready.
If the ingredients is not baked good, please put the food back in the fryer and close the
door before setting the time for a few minutes.
During the fried food, the food gets hot and the steam may escape from the air
fryer oven.
11. When a batch of ingredients is ready, the Hot-air fryer oven is instantly ready for
another batch.
Settings
This table below will help you to select the basic settings for the ingredients.
Note: Keep in mind that these settings are indications. As ingredients differ in origin, size,
shape as well as brand, we cannot guarantee the best setting for your ingredients.
Because the Rapid Air technology instantly reheats the air inside the appliance instantly
In the process of frying food, if the door is opened, the air fryer will stop working.
Smaller ingredients usually require a slightly shorter preparation time than larger ingredients.
℃
- A larger amount of ingredients only requires a slightly longer preparation time, a small-
er amount of ingredients only requires a slightly shorter preparation time.
℃
- Add some oil to fresh potatoes for a crispy result. Fry your ingredients in the Hot-air
fryer within a few minutes after you added the oil.
℃
- Do not prepare extremely greasy ingredients such as sausages in the Hot-air fryer.
℃
- Snacks that can be prepared in a oven can also be prepared in the Hot-air fryer
℃
- The optimal amount for preparing crispy fries is 700 grams in the rotating basket.
℃
- Use pre-made dough to prepare filled snacks quickly and easily. Pre-made dough also
requires a shorter preparation time than home-made dough.
℃
- You can also use the Hot-air fryer to reheat ingredients. To reheat ingredients, set the
temperature to 150℃ for up to 10 minutes.
Min-max
Amount
(g)
Time
(min.)
Temperature
(℃
o
C)
Extra information
Potato & fries
Thin frozen fries
350-450
18-25
180
Suggest to load it
on Rotating basket
Thick frozen fries
400-500
20-25
200
Suggest to load it
on Rotating basket
Potato gratin
500-600
25-30
200
Suggest to load it
on one air flow rack
in the middle track
Meat & Poultry
Beef steak
250-300
15-20
180
Suggest to load
it in two tracks,
switch two tracks
position after 10
min
Pork chops
400-500
15-20
180
Suggest to load
it in two tracks,
switch two tracks
position after 10
min