7.
Warm Function
In the standby state, you can enter the warm function, the default
temperature is 6
0
0
¼C
a
nd can’t adjust, you can press the warm key
when
the power stage is working to enter the heat preservation.
8.
Pause Function
Press “ ” once in working to enter into pause mode, the LED shows
“STOP”, stop working and the display won’t change, pause indicator
keeps constant on.
Press “ ” again to continue working. If user doesn’t cancel pause
within 60S, the cooker will automatically turn off and enter into power
on state.
9. Swith Function
Power/Temperature switch key
10. Booster Function
1 )Press “P” once in working to boost fire, LED shows “PP”. Booster
indicator keeps constant on.
2) Press “P” again to back to original working condition. Default setting
is 5 minutes, then back to previous working condition.
11.
Fan Keeps Working
When switch off, fan keeps working when IGBT temperature is higher
than around
65
º
C and stops working when IGBT temperature is lower
than around
60
º
C.
When switch off, fan keeps working when pot bottom temperature is
higher than around 1
2
0
º
C and stops working when pot bottom tem-
perature is lower than around 1
10
º
C
. If the machine keep working, the
fan keep working, when the machine stop working, the fan keep
working at least 5 mins.
12.
Automatically Switch Off When No Operation for 2 Hours
In
working mode, the cooker will automatically switch off if without any
operation after 2 hours except the mode of timer and preset.
9
6. Lock Function
1) During the power on or working state, press "lock" button, lock
indicator keeps constant on. During this mode, it will lock the control
panel except the “On/Off” button.
2) Any operation, the LED shows “LO” for 5 seconds, then shows
original info. Switch off in any way will cancel lock function.
