EN10
4.4
Test Strip
4.5.
Water Hardness Table
4.6.
Water Softener System
4.7. Setting
4.8.
Detergent usage
Run water
through the tap
(1min.)
Keep the strip
in the water
(1sec)
Shake the
strip.
Wait (1min.)
Set the hardness
level of your
machine.
1
2
3
4
5
6
NOTE:
The factory hardness level setting is “3”. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your
water company or use the test strip (if available).
Only use detergents specifically designed for domestic dishwashers. Keep your
detergents in cool, dry places out of reach of children.
Add the proper detergent for the selected program to ensure the best
performance. The amount of detergent needed depends on the cycle, load size,
and soil level of dishes.
In order to change the salt level, follow the below steps:
Open the door of the machine.
Turn on the machine, and touch the Programme button as soon as the ma-
chine is turned on.
Hold down the Programme button until “SL” disappears.
The machine will display the last setting.
Set the level by touching the Programme button.
Turn off the machine to save the setting.
Level
German
dH
French dF
British dE
Indicator
1
0-5
0-9
0-6
L1 is shown on the display.
2
6-11
10-20
7-14
L2 is shown on the display.
3
12-17
21-30
15-21
L3 is shown on the display.
4
18-22
31-40
22-28
L4 is shown on the display.
5
23-31
41-55
29-39
L5 is shown on the display.
6
32-50
56-90
40-63
L6 is shown on the display.
1
munite
1
second
1
munite
Summary of Contents for HDW-FI60D
