HLS100 - USER MANUAL
12
4. RESET LOCK
OPTION 1:
PRESS THE “RESET” BUTTON
ON THE BACK OF THE LOCK
FOR 2 SECONDS
LOCK WILL PROMPT WITH
“BEEP BEEP BEEP”
AND GREEN LIGHT
WILL BLINK TWICE
RESET THE LOCK
SUCCESSFULLY
OPTION 2:
Input “*#5#”, the lock will prompt with a “beep beep” and green light will blink quickly. Input the
“manager code #”, and green light will blink slowly. Then input the “manager code #” again.
Important:
After resetting, the lock will revert to factory settings.
IMPORTANT INFORMATION
1. # Is for confirming
2. If blue light blinks after opening the lock, it means that the lock is under lower voltage.
Please change the batteries.
