HLS100 - USER MANUAL
4
2. PRODUCT FUNCTIONS
2.1 PARAMETERS
Material
ABS for lock body shell, Zinc alloy for panel
Power consumption
Stand-by power consumption<10mA
Static power consumption <25uA
Load current <300mA
Working voltage
DC3V (2x CR2032 button cell battery)
Estimated working life 1 year
Working environment
Working temperature -20C +65C
Working humidity 10% ~ 90%RH
Functions
Features
Activate sound prompts
Input “*#6#” and the lock will prompt with a “beep” and
green light will blink quickly. Input the “manager code#”
and green light will blink slowly. Then input “0#” and
lock will beep and green light will blink once. Sound
activation is successful.
*#6# > manager code# > 0#
Deactivate sound prompts
Input “*#6#”and the lock will prompt with a
“beep” and green light will blink quickly. Input the
“manager code#” and green light will blink slowly. Then
input “1#” and lock will beep and green light will blink
twice. Sound deactivation is successful.
*#6# > manager code# > 1#
Scramble code protection
1. User can input any random numbers (before and/or
after) of the full correct code to unlock, as long as the
correct code is sequential.
2. The total code should be less than 20 digits.
Enable the function of scramble code
Input “*#4#” and the lock will prompt with a
“beep” and green light will blink quickly. Input the
“manager code#” and green light will blink slowly. Then
input “0#” and the lock will beep. Scramble code has
been enabled successfully.
*#4# > manager code # > 0#
Disable the function of scramble code
Input “*#4#” and the lock will prompt with “beep” and
green light will blink quickly. With a “beep” input the
“manager code#” and green light will blink slowly. Then
input “1#” and the lock will beep. Scramble code has
been disabled successfully.
*#4# > manager code # > 1#
Low Battery alarm
When batteries voltage is lower than 2.4V the light
will shine in blue and the lock will prompt with “beep,
beep” on every opening to remind the user to change
batteries.
2.2 FUNCTIONS & FEATURES
