ATTENTION:
By default, the miniLock is set to Locker Mode (Multi User
Mode). The miniLock can easily be set to Personal Mode with either of the two
below steps:
1. Before battery tab is removed, hold down 0 key, pull the tab and key the 0
key pressed 3 seconds
2. Convert lock to personal mode at any time by entering in
Master Code
1 0
PERSONAL MODE
OPENING WITH USER PASSWORD:
1)
Enter your 4-digit user password.On first use factory default is <1-0-1-0>
2)
Rotate handle within 5 seconds to opening direction and there will be a con-
firmation beep.
User Password
1
2
Below illustrations show examples of
lock installed for right handed door. Lock
can be installed for left or right handed
If personal mode is selected, press password. Press button again
and enter new 4-digit user password. Press
button again to approve new
password. You will get a confirmation beep and green LED light will blink.
NEW USER
OLD USER
NOTE: WHAT HAPPENS IF USER FORGETS THEIR PASSWORD?
Locker Mode (Multiple User):
Use Master code to unlock and turn handle to open position. Lock is now ready
for next user to enter in their unique code.
Personal Mode (Single User):
1) Use master code to reset the lock to factory defaults.
MasterCode
4 0
2) Default user code is now < 1-0-1-0 > and can be changed.
14
