Press
button
Applied model with Reset button
Press Reset button using a sharp object such as ballpoint pen, toothpick, etc
Function to reset program by pressing Reset button in case of temporary error rather than product malfunction.
Reset function
(Applied model with reset function)
External dual locking function
(Applied model with external dual locking function)
Model with Open/Close button
-
Enable : Press and hold Open/Close button for more than 5 seconds (Ding dong sound)
-
Disable : Press and hold Open/Close button for more than 5 seconds to disable the function
and open a door
When the external dual lock is set, the door does not open in spite of pressing Open/Close button from the indoor.
(Prevent intrusion through milk hole)
Master number function
(Applied model with master number)
Cover type
- Enable: Press and hold # button on outdoor body for more than 5 seconds to enable dual locking function
- Disable: Lift up outdoor body cover Enter registered password Pull down cover or press “ ” button to disable the function
Non-cover type
- Enable: Press and hold # button on outdoor body for more than 5 seconds to enable dual locking function
- Disable: Press the “ ” button of the outdoor body
Enter registered password
Press the “ ” button
Touch pad type A
- Enable: Press and hold ‘Start/End’ button on outdoor body for more than 5 seconds to enable dual locking function
- Disable: Press and hold ‘Start/End’ button on outdoor body Enter registered password Press or ‘Start/End’ button to
disable the function
Touch pad type B
- Enable: Press more than 2 buttons on touch keypad of outdoor body Press and hold # button on outdoor body for more than
5 seconds to enable dual locking function
-
Disable: Press more than 2 buttons on touch keypad of outdoor body Enter registered password Press “ ” button to
disable the function
Inside dual locking function
(Applied model with Inside dual locking function)
Once inside dual locking function is enabled, a door will not open even though entering valid password from outside.
It is allowed to register or use password and touch key (Card/Key tag) in Administrator mode.
Register and change master number
- Registration: Indoor Input button
Press 0 and # in order
Enter master number to register Press button
- Change: Indoor Input button
Press 0 and # in order
Enter registered master number Press button
Enter new master number
Press button
Register and delete master touch key (Card/Key tag)
-
Registration: Indoor Input button
Press 0 and # in order
Enter registered master number Press button
Enter master touch key (Card/Key tag) Press button
- Delete: Indoor Input button
Press 0 and # in order
Enter registered master number Press # and O in order
Summary of Contents for 7200
Page 1: ...USER MANUAL ENGLISH ...
Page 2: ......
Page 13: ...HƯỚNG DẪN SỬ DỤNG TIẾNG VIỆT ...
Page 14: ......