26
Mounting and Brief Operating Instructions
E
n
g
lis
h
Dialock Cylinder DC - Status: 09.2003 - 732.29.140
Commissioning
Important:
Before closing the door, carry out the following steps to use the lock
for the first time. Otherwise it will not be possible to open the door
from the outside.
When using for the first time, the green programming key and the red
cancelling key must be assigned as follows:
1. Keep the green programming key and the red cancelling key ready for
use.
2. Press the white button on the panel.
The green LED flashes for a few sec-
onds.
3. While the green LED is still flashing, hold the green programming key
in front of the panel. If the teaching operating is successful, the green
LED lights up for a moment and then the red LED begins to flash.
4. While the red LED is still flashing, hold the red cancelling key in front
of the panel. If the teaching operating is successful, the green LED
lights up and then the electronics switch off.
5. If an error has occurred in the assigning operation, switch the Dialock
DC Cylinder on again and repeat the process from step 2 onwards. If
errors occur again, contact the Dialock agent.
Important:
Avoid misuse of the programming, cancelling and user keys by unau-
thorised persons. Always keep the programming, cancelling and user
keys in a safe place.
