19
Mounting and Brief Operating Instructions
E
n
g
lis
h
Dialock Cylinder DC - Status: 09.2003 - 732.29.140
Area of application
The Dialock DC Cylinder is convenient and easy to use and is part of the
Dialock Electronic Locking System. It is an electronic locking cylinder for
indoor installation with mortise locks to DIN 18 251. It is possible to
replace an existing standard locking cylinder with the Dialock DC Cylinder.
Conditions for installation
Important!
To install the Dialock DC Cylinder, use only a cylinder of the correct
inner and outer length (distance A and B). When measuring the cylin-
der lengths, the height of the inner and outer lock rosettes must be
taken into account.
The dimensions A and B are
important when ordering.
A = outer dimension (mm):
distance between the outer
edge of the inner rosette and
the centre of the hole for the
forend.
B = inner dimension (mm):
distance between the outer
edge of the inner rosette and
the centre of the hole for the
forend.
Door panel
Outer edge of
inner rosette
Outer edge of
outer rosette
Hole for forend
