20
Mounting and Brief Operating Instructions
E
n
g
lis
h
Dialock Cylinder DC - Status: 09.2003 - 732.29.140
Instructions for Installation
Important!
The Dialock DC Cylinder should be installed only by a qualified per-
son. Non-compliance with these instructions may cause serious
damage to the Dialock DC Cylinder.
Do not close the door before carrying out all of the following steps.
Otherwise it will not be possible to open the door from the outside.
Note: The Dialock DC Cylinder is already greased by the manufac-
ture. Further lubrication is not required.
1. Using a suitable tool, release the front cover (1) from the outer knob (4)
and carefully pull it out. The front cover (1) is secured against twisting
by means of a groove..
Important:
Take care not to damage the connection wire (5).
2. Using the Allen key, unscrew the two screws (3) inside the outer knob
(4) and remove the outer knob (4).
Important:
Take care not to damage the connection wire (5).
3. From the inside of the door, push the connection wire (5) through the
lock (12). Push the cylinder (6) into the lock (12) until the forend (11)
can be screwed in from the edge of the door.
