21
Mounting and Brief Operating Instructions
E
n
g
lis
h
Dialock Cylinder DC - Status: 09.2003 - 732.29.140
Important:
Check the position of the cylinder (6) before screwing in the forend.
Do not use force. Non-compliance with these instructions may
irreparably damage the cylinder (6) and the lock (12).
4. Tighten the cylinder (6) with the forend (11). Check that the catch turns
smoothly when the inner knob (10) is turned.
5. Push the connection wire (5) through the slot in the outer knob.
6. Push the front cover (4) onto the outside of the cylinder (6) and screw
the two screws (3) hand tight using the Allen key.
Important:
When pushing into position, the outer knob (4) must not be twisted,
otherwise the connection wire (5) may be damaged.
7. Push the O-ring (2) into the groove on the front cover (1).
