H
D
E
04
.05
.20
10
Ma
ße
in
m
m
–
D
im
e
nsi
o
ns i
n
mm
–
D
im
en
si
on
s en
mm
–
Me
di
da
s en
mm
-
Mi
su
re
in
m
m
4
4.2 Installation
description
The installation is described using only pictures.
4.3 Function test
After completing installation, perform a manual function test.
Push the lever handle at the inside of the door:
Correct result:
• Turning the DND thumbturn counter-clockwise makes the deadbolt move out.
• When the interior handle is pressed, the latch and the deadbolt are retracted.
The door can be opened.
Push the lever handle at the outside of the door:
Correct result:
• The lever handle is blocked. The door can not be opened.
If this is not the case, check the individual installation steps.
WARNING
Risk of fatality due to failures or faults in electromagnetically
sensitive devices!
The electromagnetic radiation of the product can cause faults in sensi-
tive parts (e.g. in medical equipment). The functionality thereof will be
adversely affected.
> Do not mount product close to electromagnetically sensitive
devices.
> Pay attention to the safety instructions for the
electromagnetically sensitive devices.
> If you have any doubts regarding compatibility, please contact
the manufacturer.
NOTE
Damage to product due to incorrect installation!
> Adhere to installation requirements.
> Do not jam or damage wires during installation.
> Never start up and use the product if any wires have been
damaged.
> Always drill holes in the door leaf from both sides to prevent
pieces of the door from breaking away.
For step-by-step installation instructions, see picture sec-
tion starting at
page 7
.
