15
H
D
E
0
9
/2
015
732.
29.
49
8
ZN 6.
172.
090
0.9
0
a
Battery change
If the battery charge is low, the red and white LED flash alternately three times when
the electronics are switched on by presenting a key.
The date and time are saved when the batteries are removed. This information is
reloaded when new batteries are inserted.
The clock stops for the duration of the battery change.
The batteries should therefore be changed quickly.
If the time has to be exact to the nearest minute, it can be set using the DIALOCK
MDU after replacing the batteries.
The locking authorisations for the user keys are also retained after a battery change
and do not have to be reset.
NOTE
Damage to product due to incorrect maintenance!
> Do not use lubricants.
> Do not carry out repairs.
> Contact the manufacturer in the event of damage / malfunctions.
> If parts have to be replaced, always use original spare parts from
Häfele.
NOTE
Malfunction due to low battery charge!
Problem-free operation is only ensured if adequately charged batteries are
used.
> Replace weak batteries immediately as soon as the signal occurs!
> Always use new AA batteries.
> Always replace all four batteries.
For step-by-step instructions "
" see illustrations
starting on page
.
NOTE
> Do not throw batteries in the household waste!
> Dispose of batteries in an environmentally friendly way, e.g. using a mu-
nicipal collection point.
AA
BA_DT700_DT710.book Seite 15 Donnerstag, 17. September 2015 11:34 11
