H
D
E
1
2
/2
018
73
2.2
9
.4
97
17
The product is intended for the following areas of application:
• Use on room doors inside buildings
• Use on doors that comply with the specified installation requirements
Correct purpose of use also includes adhering to the manufacturer's operating, ser-
vice and maintenance conditions.
Correct purpose of use also includes observing all specifications contained in these
installation and maintenance instructions.
Any use beyond or other than the correct purpose of use shall be deemed improper
use.
2.3 Incorrect purpose
of use
Any use that is not mentioned in chapter “2.2 Correct purpose of use” is considered
to be improper. The operator is solely responsible for any resulting damage. It is par-
ticularly important to avoid the following:
• Use outdoors
• Use in potentially explosive or aggressive environments
• Use in damp environments
• Use in the vicinity of electromagnetically sensitive devices
• Omitting components during installation
• Changes to the installation order
• Use of defective or damaged components
• Use of non-original parts
• Use without emergency opening facility
• Modifications to the product
• Repairs to the product
2.4 Safety symbols
The following stickers are located on one or more components of the access control
system. They relate to the immediate environment of where they are located.
Crossed-out dustbin
This image indicates that the respective component must not be
disposed of with residential waste.
2.5 Obligations
of the operator
Operator is the person who operates the access control system for commercial or
economic purposes or a allows third party for use thereof and bears the legal product
responsibility for the protection of the user, the personnel, or third parties during
operation.
Operator's obligations
The access control system is commonly used in the commercial sector. The opera-
tor of the access control system is therefore subject to statutory occupational safety
obligations.
In addition to the safety notes in these installation and maintenance instructions,
safety, work safety, and environmental regulations valid for the area of application
of the access control system must be followed.
Here, in particular:
• The operator must ensure that escape routes and emergency exit doors are ac-
cessible for all people in case of danger.
• The operator must be aware of the applicable occupational safety regulations
and determine other hazards in a hazard assessment that may arise from the
special working conditions at the place of use of the access control system.
They must be implemented for the operation of the access control system in the
form of operating instructions.
ins-src_732.29.497.book Seite 17 Dienstag, 18. Dezember 2018 10:06 10
