3
H
D
E
01
/2
0
1
9
732.
29.
50
2
1. Special notes
1.1 Contents and
target group type
instructions
It is essential to pay attention to these operating instructions in order to operate the
product successfully and safely. Please pay attention to all of the specified
instructions and notes!
The operating instructions consist of two separate documents:
• Operating instructions
• Installation and maintenance instructions
The following groups must read and fully understand the specific instructions that
are indicated on a per group listing on this bracket of instructions:
1.2 Obligations
of the operator
Operator is the person who operates the access control system for commercial
or economic purposes or a allows a third party to use the access control system and
thus bears the legal product responsibility for the protection of the user, the
personnel, or third parties during operation.
Operator's obligations
The access control system is commonly used in the commercial sector.
The operator of the access control system is therefore subject to statutory
occupational safety obligations.
In addition to the safety notes in these instructions, safety, work safety, and
environmental regulations valid for the area of application of the access control
system must be followed.
Here, in particular:
• The operator must ensure that escape routes and emergency exit doors are
accessible for all occupants in case of danger.
• The operator must be aware of the applicable occupational safety regulations
and determine other hazards in a hazard assessment that may arise from the
special working conditions at the place of use of the access control system.
The safety regulations must be implemented for the operation of the access
control system in the form of operating instructions.
• During the entire operating time of the access control system, the operator must
verify that the operating instructions created correspond to the current state of
the regulations and, if necessary, adapt them.
• The operator must clearly regulate and specify the responsibilities for
installation, operation, troubleshooting, maintenance, and cleaning.
• The operator must ensure that all parties handling the access control system
have read and fully understand these instructions. In addition, the operator
must train their personnel at regular intervals and inform them about the risks.
Group types
Part of instructions to be read
Operator
Entire operating instructions
Entire installation and maintenance instructions
Installation and
start-up personnel
Entire operating instructions
Entire installation and maintenance instructions
Personnel with
locking authorizations
Chapter 6-9 of operating instructions
User
The operator must show the user how to operate
the product safely and properly.
ins-src_732.29.502_book.book Seite 3 Montag, 14. Januar 2019 12:50 12
