background image

H

D

01

/2

0

1

9

  

   

   

  

 

732.

29.

50

2  

  

  

   

   

 

6

2.2  Incorrect purpose 

of use

Any use that is not mentioned in chapter 2.1 is considered to be improper. 
The operator is solely responsible for any resulting damage. It is particularly 
important to avoid the following:

•  Use outdoors
•  Use in potentially explosive or aggressive environments
•  Use in damp environments
•  Use in the vicinity of electromagnetically sensitive devices
•  Omitting components during installation
•  Changes to the installation order
•  Use of defective or damaged components
•  Use of non-original parts
•  Use without emergency opening facility
•  Modifications to the product
•  Repairs to the product

2.3  Technical data

3.  Safety

3.1  Safety notes and 

symbols in these 
instructions

Safety notes

Safety notes in these instructions follow a uniform structure. They are introduced by 
a signal word that indicates the extent of the hazard. This is followed by the source 
of the danger and measures to avoid them. 

The following risk levels are distinguished: 

Dimensions interior 
and exterior module

22.5 mm x 70 mm x 265.5 mm

Voltage supply

4x 1.5 V Mignon batteries AA (LR6) alkaline
Type E91 Energizer industrial 
(Häfele Cat. No.: 910.54.980)

Temperature range

0°C – +55°C

Humidity

0 – 95%, not condensed

DANGER

This combination of symbol and signal word indicates an immediately 
dangerous situation causing death or serious injury if not avoided.

WARNING

This combination of symbol and signal word indicates a potentially 
dangerous situation that may cause death or serious injury if not avoided.

CAUTION

This combination of symbol and signal word indicates a potentially 
dangerous situation that may cause minor or light injury if not avoided.

NOTE

The note is used to point out dangerous situations which could lead to 
potential property damage/consequential damage to the product or damage 
to the environment. Notes are also used to provide important additional 
information.

ins-src_732.29.502_book.book  Seite 6  Montag, 14. Januar 2019  12:50 12

Summary of Contents for DT 750

























Reviews: