11
INSTALLATION
Electrical connection
Warning!
All electrical work should be carried out by a suitably qualified and authorised electrician.
No alterations or wilful changes in the electricity supply should be carried out.
The hob is manufactured to work with a one-phase alternating current (230V 1N~50Hz)
and is equipped with a 3 x 4 mm2 connection lead.
The electricity supply for the hob must have a safety switch which enables the power to
be cut off in case of emergency. The distance between the working contacts of the safety
switch must be at least 3 mm.
Before connecting the hob to the power supply it is important to read the information on
the data plate and the connection diagram. Caution! The installer is obliged to provide the
user with “appliance electrical connection certificate” (enclosed with the warranty card).
Live L: BN - brown
Neutral N: BU - blue
Earth PE: GNYE -green/yellow
Power circuit should be protected with a 32A fuse.
Recommended type of connection lead: H05VV-F,
3 x 4mm2.
Important!
If the fixed power supply cable is damaged,
it should be replaced at the manufacturer or at an autho-
rized servicing outlet, or by a qualified person to avoid
danger.
Connection diagram
Caution! Voltage of heating elements 230V. Caution! In the event of any connection the
safety wire must be connected to the PE terminal.
Summary of Contents for HC-I604D
