20
OPERATION
Change Timer Duration
Check Timer Duration
Stop the Timer
Kitchen Timer
Programmed Timer setting can be changed at any time.
To change the programmed Timer setting, select a cooking zone by touching the cooking
zone selection sensor field (3), and then touch the Timer selection sensor field (4).
To check progress of Timer countdown at any time, touch the timer sensor field (4). Timer
indicator light (5) of a relevant cooking zone will flash.
When no cooking zones are in use, the Timer function can be used as a regular Kitchen
Timer.
When the set time has elapsed an acoustic signal is sounded, which can be muted by
touching any sensor field. If no sensor field is touched, the acoustic signal will stop auto-
matically after 2 minutes. To stop the timer countdown before the set Duration has elapsed:
Timer countdown can be set independently for all cooking zones.
If more than one timer is set the shortest duration is displayed. Timer indicator light
(5) of a relevant cooking zone will flash.
timer function can be set independently for all individual cooking zones. Timer countdown
can be set from 1 to 99 minutes. To set the timer:
•
•select a cooking zone by touching cooking zone selection sensor field (3) and select
the desired heat setting from 1 to 9 by sliding your finger across the heat setting se
-
lection sensor field (2). The display will show the selected heat settings from 1 to 9.
•
•then, during the next 10 seconds, touch the Timer selection sensor field (4). “00” will
be shown on the Timer display (4) and the appropriate Timer activation indicator light
(5) will light up to indicate activation of the Timer function for the relevant cooking zone.
•
•Now, select the desired Timer setting by sliding your finger across the setting selection
sensor field (2). The second digit is set first and the first digit is set next. Once the
second digit is set, touch the sensor (4) again to set the first digit. If you do not set
any value for the first digit within 10 seconds, the value will be set to “0”(eg.”06”). The
countdown starts when the Timer activation indicator light (5) starts flashing.
•
Touch cooking zone selection sensor field (3) to select a cooking zone. The display will
become bright.
•
• Then touch and hold sensor field (4) for 3 seconds or adjust duration using the sensor
field (2) sliding your finger down to “00”
Summary of Contents for HC-I604D
