20
Replacing lamps
(Depending on the model available).Disconnect the appliance
from the electricity.
Warning!
Prior to touching the light bulbs ensure they are
cooled down.
Replace the old light bulb with the one of the same type as
specified in the feature label or near the light lamp on the
hood.
To replace the neon proceed as follows:
1.
Lift the trolley.
2.
Disconnect from power supply. (this operation can be
carried out by disconnecting the plug, if accessible, or
open the switch if envisaged during installation or press
the red button in the control box (
Fig. 10c
)
3.
Remove the screws which fix the upper front as shown in
(
Fig. 16
)
4.
Lift the upper front (
Fig. 17
)
5.
Remove the damaged neon (
Fig. 18
) and replace it with
one having the same characteristics
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
