The accessible surface
may be hot during
operation.
•
•
•
•
•
Please observe the installation instructions provided and note that this appliance
should only be installed by a quali fied technician.
In case a new socket is needed, installation and cable connection must only be done
by a quali fied electrician. If the plug is no longer accessible following installation, a
pole disconnecting device must be present on the installation site with a contact gap
of at least 3 mm.
Adapters, multiway strips and extension cords must not be used. Overloading can
This appliance is NOT intended for use in a commercial environment.
The appliance is
installed earthed socket.
result in fire.
If the appliance is not fitted with a supply cord and a plug, the connection equipment
must have a contact separation in all poles that provide full disconnection, and the
appliance must be incorporated in the fixed wiring in accordance with the wiring rules.
•
fitted with a plug and must only be connected to a properly
IMPORTANT INFORMATION ABOUT INSTALLING
8