Installation
5
1. Mark and drill bores by using the installation
template first, then fix the mortise into the
door frame and tighten the 2 screws to fix the
mortise on the door.
2. Fix 5 screw bolts on the front panel, place
square shaft and pressure spring into the
bore.
M6 Connecting
screw bolt *1
Square shaft
Pressure spring
M5 Connecting
screw bolt *4
Do not make the
mortise deadbolt
come out.
1. Spring: the big end is downward.
2. Select the square shafts and screw bolts with proper
length according to door thickness range.
3. Pass the connection wire through the top bore.
Then align and insert square shaft into mortise
holes to make the front panel against the door
closely.
4. Install the mounting plate with fixing screws
tightly against the door surface.
