Manual SOUNDSYSTEM 420R
applicable for
822.65.004
Version (Technical and optical modifications reserved)
03.08.2015
Seite 3 von 13
Read the instructions carefully before installation.
9. Mounting and installation
- Install the power cable for 12VDC, antenna, speakers and the IR receiver cable 3 x 1.5qmm to the
SOUNDSYSTEM 420R in accordance with installation guidelines, and your desired port scenario.
- Check whether the proposed location of the reception quality is sufficient.
Attention:
Obstruct the device only in locations that ensure sufficient temperature dissipation. Not e.g. in wool,
because the device can drop out at high temperature.
Mounting the IR sensor
- Cut the hole for the IR sensor and fix it in the ceiling.
Attention:
If fluorescent lamps are mounted, the IR Sensor should not be mounted within the direct cone of light
from the lamp.
Connecting the antenna
- Connecting the antenna cable: Connect the outer screen at
(-)
and the inner conductor at
(+)
.
- Conntcting the included wire antenna: to
ANT
.
Connections
Loudspeakers IR-Receiver Antenna Power Supply
9.1. Connections in general
The SOUNDSYSTEM 420R is applicable
for Haefele cabling system.
Note
Speaker connection: green
Power connection: yellow
Accessory
: Loox Power Supply / 12 V DC
