3
1. Preparing cabinet bottom and side
all/cabinet top
Preparing cabinet bottom
Drill three holes into the cabinet bottom
according to the illustration included in the
fitting instructions.
EXAMPLE
EXAMPLE
Specification Document
Drill two holes 12 mm deep with 5 mm bit
into side walls (see drilling dimensions in
fitting instructions).
Drill one 10 mm hole into the cabinet top
according to the illustration included in the
fitting instructions.
If a top mounting bracket is specified
(mainly frameless cabinets):
For cabinets with cabinet top:
EXAMPLE
EXAMPLE
Specification Document
EXAMPLE
EXAMPLE
Specification Document
