Hafele WTX 202, Installation Instructions Manual

23

H

D

E

 1

0

/2

018

73

2.2

9

.5

10

2.6  Obligations of the operator

Operator is the person who operates the access control system for commercial or 
economic purposes or a allows third party for use thereof and bears the legal product 
responsibility for the protection of the user, the personnel, or third parties during 
operation.

Operator's obligations

The access control system is commonly used in the commercial sector. 
The operator of the access control system is therefore subject to statutory 
occupational safety obligations.

In addition to the safety notes in these instructions, safety, work safety, and 
environmental regulations valid for the area of application of the access control 
system must be followed.

Here, in particular:
•  The operator must ensure that escape routes and emergency exit doors are 

accessible for all people in case of danger.

•  The operator must be aware of the applicable occupational safety regulations 

and determine other hazards in a hazard assessment that may arise from the 
special working conditions at the place of use of the access control system. 
They must be implemented for the operation of the access control system in the 
form of operating instructions.

•  During the entire operating time of the access control system, the operator must 

verify that the operating instructions created correspond to the current state of 
the regulations and, if necessary, adapt them.

•  The operator must clearly regulate and specify the responsibilities for 

installation, operation, troubleshooting, maintenance, and cleaning.

•  The operator must ensure that all persons handling the access control system 

have read and understood these instructions. In addition, the operator must 
train the personnel at regular intervals and inform them about the risks.

Furthermore, the operator is responsible for ensuring that the access control system 
is always in perfect technical condition. The following therefore applies:
•  The operator must ensure that the maintenance intervals specified in these 

instructions are followed.

•  The operator must have all safety devices inspected regularly for function 

and completeness.

NOTE

Damage to product due to damaged wires!

Damaged wires affect the functionality of the product.

>  Do not trap or damage wires during installation.
>  Never start up and use the product if any wires have been damaged.

ins-src-732.29.510.book  Seite 23  Montag, 29. Oktober 2018  12:14 12