*Continuous duty cycle across the audio band. Depending
on impedance, time may be thermally limited to several
minutes.
Congratulations on your purchase of this EXCELINEAR
POWER AMPLIFIER. We are confident that this amplifier
is capable of driving any known loudspeaker load, with
sufficient power reserves to suit any home listening situa-
tion. Furthermore, its refined circuitry will deliver that power
with an accuracy that is sure to satisfy the most demanding
of audiophiles.
INSTALLATION
The gloss black insert on the faceplate of your new Hafler
Equipment has been packaged with a
removable
protec-
tive coating. Please peel off this coating following installa-
tion.
When cleaning the faceplate, we advise a soft cotton cloth
with a non-abrasive cleaner that is safe for Lexan and
painted surfaces.
DO NOT
use paper towels or any coarse
materials to clean the faceplate as these materials may
scratch the insert.
Ventilation
Adequate air flow is important to the continuing reliability
of any power amplifier.
The XL-600 uses a quiet, con-
tinuously variable speed fan to cool the entire chassis
Cool air must circulate freely into the side vents and out
the rear vent. Allow at least one inch on each side, and at
least three inches to the rear for unimpeded flow.
AC Line Connections and Switching
NOTE: BE SURE YOUR AMPLIFIER IS WIRED FOR
YOUR LOCAL LINE (MAINS) VOLTAGE BEFORE CON-
NECTING AC POWER!
2
