7
This charger should be used only to charge battery pack ZS-128002.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Before using the charger, read all the instructions and cautionary markings on the charger and
battery pack as well as the instructions on the battery pack.
Only charge your battery pack indoors as the charger is designed for indoor use only.
DANGER:
If the battery pack is cracked or damaged in any other way, do not insert it in the
charging base. There is a danger of electric shock or electrocution.
WARNING:
Do not allow any liquid to come into contact with the charger. There is a
danger of electric shock.
The charger is not intended for any use other than charging the exact type of rechargeable
battery pack as supplied with the charger. Any other use may result in the risk of fire, electric
shock or electrocution.
The charger and battery pack supplied with it are specifically designed to work together. Do
not attempt to charge the battery pack with any other charger than the one supplied.
Do not place any object on top of the charger as it could cause overheating. Do not place the
charger near any heat source.
Pull on the charger to disconnect it from the power source. Do not pull on the lead.
Make sure that the charger lead is positioned where it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
Do not use an extension cord unless it is absolutely necessary. The use of an improper
extension cord could cause the risk of fire, electric shock or electrocution.
Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise
damaged in any way. Take the charger to an authorized service centre for a check or repair.
Do not disassemble the charger. Take it to an authorized service centre when service or repair
is required. Incorrect re-assembly may result in the risk of fire, electric shock or electrocution.
To reduce the risk of an electric shock, unplug the charger from the power supply before
attempting to clean it. Removing the battery pack alone does not reduce the risk.
The charger is designed for use from a standard household electrical supply. Do not attempt to
connect the charger to a supply with a different voltage.
Do not expose charger to water, rain, or snow.
Never attempt to connect two chargers together.
Never insert objects into the ventilation holes of the charger. This can cause electric shock or
damage the charger.
Unplug the charger from the outlet before cleaning. This reduces the risk of electric shock.
Remove the battery will not reduce this risk.
Never charge a battery already fully charged.
EXTRA SAFETY INSTRUCTIONS
Wear ear protection when using the cordless drill.
The noise pollution can cause hearing loss.
Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
