8
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
SAFETY ADVICE FOR
BATTERY AND CHARGER
WARNING! During the use of tools supplied with batteries, the basic safety measures must
be followed in order to reduce fire hazards, electrolyte leakage and personal injury,
including the following precautions:
Ensure that the battery block is suitable for the tool.
Ensure that outside surface of the battery block is clean and dry before connecting it to the
charger.
Ensure that the batteries are charged using the correct charger recommended by the
manufacturer. Incorrect use can create a risk of electric shock, overheating or the leaking of
corrosive liquid from the battery.
If there is an electrolyte leak, avoid any contact with the skin. In the event of a leak, wipe with a
rag. If the liquid comes into contact with the skin, rinse abundantly with water. In the event of a
reaction or contact with the eyes or mucous membranes, consult a doctor.
Ensure that the appliance is properly switched off before inserting the battery into the appliance.
Inserting a battery into a appliance while it is switched on can cause accidents.
Use the appliance only with the type of battery indicated in the instructions. Using another type of
battery can create a serious risk of injury and cause a fire
When the battery is not in use, keep it away from metal objects such as trombones, coins, keys or
other small metal objects that can create a connection between one terminal and the other. Short-
circuiting the terminals of batteries can cause burns to the user and cause a fire.
Dispose of batteries
Ensure that the battery is properly disposed of:
1-Do not throw it away
2-Do not to burn it
3-Do not throw it in a river
4-Dispose of it in the designated collection containers (ask your retailer)
INTENDED USE
The machine is intended for driving in and loosening screws and bolts as well as for tightening and
loosening nuts within the respective range of dimension.
And it can be used to drill holes on wood, concrete or metal. When drill the hole in the steel, let the
machine in low speed (not full speed). Thus it can improve the drilling efficiency.
