4.3. Operation
• Switch on the unit with the main switch on the backside of the unit -
the control light is on now
• Set the time minutes - seconds (max. 99 min.)
• Press the START button - The unit stays on for the time set
• Intermediate stop - Press the STOP button, continue by pressing the START button
• When the set time is over, an acoustic tone is heard
• By simultaneous pressing of the second button the timer can be set back to the zero position
4.4. Cleaning of dentures, metal framework, etc.
• Fill approx. 50% of the enclosed steel pins into a cup.
• Put the object into a cleaning box and fill it with water so that the object is evenly covered. Before cleaning miscellaneous works such as telescopes etc. these
should be padded with cotton wool or similar material so that the friction is not affected.
• Add some drops of Speedo-Clean Liquid to the water, quantity as necessary.
• Put the closed container onto the unit and set the timer as desired.
• Rinse off the cleaned object with water afterwards
5. MAINTENANCE
AND
CARE
• The unit does not require any maintenance
• Just wipe off the unit with a moist cloth.
• Please check the plastic cup regarding density regularly.
6. GUARANTEE
The producer ensures that the product is free of defects and that it shows all guaranteed features and/or all characteristics agreed upon. The warranty starts
with the day of delivery of the product and is valid for twelve months. Excluded from the warranty are faults, careless use of the product, connection to unsuitable
power supply, operation with the wrong voltage, acts of God, such as fire, lightning, humidity, etc. In case of justified complaints the producer has the right to
repair, to deliver spare parts or to decrease the sales price. Cancellation of the sales contract can only be claimed by the customer after two repairs have been
done without success.
Hager & Werken
GmbH & Co. KG • Postfach/P.O.B. 10 06 54 • D-47006 Duisburg (Germany) • Internet: www.hagerwerken.de
SPEEDO-CLEAN
Instruction for use
1
.
INSTRUCTIONS FOR THE USER
1.1. Speedo Clean complies with modern technique and the basic requirements of the EC directives.
1.2. The user is responsible for the compliance of all safety instructions and for the specified use. Everyone using the unit should know how to use
SPEEDO-CLEAN
and be able to operate the unit without any danger.
2.
SAFETY INSTRUCTIONS
2.1. Specified use of
SPEEDO-CLEAN
:
Speedo-Clean was developed and manufactured for the cleaning of surfaces and dentures, cast models, etc.
2.2. Possible danger:
Since the
SPEEDO-CLEAN
unit is operated with a magnetic field, all objects and units that could be influenced negatively by the magnetic effect should be
kept out of a radius of 50 cm distance (pace maker, watches, etc.).
Keep the lid of the cleaning tank closed during operation. If
SPEEDO-CLEAN Liquid
is used, the relevant safety instructions must be observed.
3.
TECHNICAL DATA
Weight:
2 kg
Output:
35 watt
Speed:
1.700 rpm
Voltage:
230 V
Frequency: 50/60 Hz
3.1. Function of
SPEEDO-CLEAN
Speedo-Clean has been developed to clean dentures and to polish metal surfaces without damaging the model. A magnetic field makes stainless steel pins
rotate in the cleaning tank. By adding the Speedo-Clean Liquid cleaning solution a high cleaning effect of the models is obtained.
4.
INSTALLATION AND OPERATION
4.1. Installation:
Take
SPEEDO-CLEAN
out of the transport box and find a suitable non-slip surface to install the unit (also see 2.2. possible dangers). Please inspect the unit
on possible damages. Connect the unit to the mains (230 V)
4.2. Operating devices:
1. Main switch (on the back of the unit)
2. Power supply (on the back of the unit)
3. Control lamp
4. Timer incl. Start-/Stop switch
Main switch and power
supply on the back of
the unit.
2005111702
