For your safety
4
Technical changes reserved
-
Only use the products in a proper condition.
-
Ensure the required safety inspections by personnel authorised by us.
-
Damage and malfunctions which may occur due to improper transport and
installation by reason of the heavy weight can only be reliably prevented by
specialist personnel trained and authorised by us.
-
Instability of the housing when the doors are opened must be expected if the
housing has not yet been screwed to the structure.
-
Always keep the doors' swivel range free.
-
Comply with the technical requirements in our catalogue and data sheet for
the product in question.
-
Note the sum of the power losses of the installed devices and wires in
comparison with the specified power loss of the housing. The specified
power losses are idealised values; they assume average environmental values
such as temperature, humidity, mounting surface, uniform arrangement of the
switching elements, etc.
-
Please also note that what are referred to as "hot spots" can form, depending
on the placement of the installed elements; therefore ensure that the
distribution of the fittings is as uniform as possible and check them using a
control measurement in the interior if required.
-
Access to the housing by unauthorised persons must be prohibited.
-
The doors of the housing must be kept closed in the operating state.
-
An improper installation can impair the protective function.
-
Comply with all requirements of these operating and installation instructions.
-
Screw connections for the framework may only be made using approved,
suitable screws/dowels.
-
The suitability of the screws/dowels must be checked for the specific
framework.
-
The housing must not be glued, painted or coated in any other manner.
-
The housing on the body must not be damaged (drilled holes, screws).
-
The locking systems must not be changed or replaced.
Summary of Contents for FB LE Series
