Functional test, safety check, maintenance
28
Technical changes reserved
-
The fire housing should be serviced at least once a year and tested for
perfect function. In your own interests, we recommend that you perform a
function check (visual inspection) once a month. The safety check can only
be performed with the necessary care by a qualified employee, as adequate
experience and comprehensive level of knowledge are indispensable.
-
Mild household cleaners can be used to clean the outside of the fire
enclosure.
-
The locking mechanism of the doors must be oiled 2 x per year.
-
The fire enclosures must be protected against water, penetrating moisture
and spray water.
-
If safety-relevant damage is found, the fire enclosure must be repaired using
original parts before further use.
-
The ventilation unit, smoke detector and battery must be checked 2x per
year.
Environmental protection:
Electrical waste products should not be disposed of with
household waste. Please recycle electrical components
in a designated location. You can get advice from your
local authority on professional recycling.
13
Functional test, safety check, maintenance
14
Disposal information
Summary of Contents for FB LE Series
