Assembly
32
Technical changes reserved
Step
Action
5
-
Remove the sealing strip.
-
Screw the frame element to the desired hinge side with the spacer.
-
Press the sealing strip onto the installed frame element.
Hinge side (new)
1) Frame element
6
-
Remove the inner layer and evenly push it 2 mm in the direction of the
hinges.
-
Push down the inner layer and screw in the supplied screws using a bat-
tery-powered screwdriver.
ATTENTION
Incorrect tightening torque of screws.
This causes material damage.
Avoid overtightening the screws during installation
Observe the maximum tightening torque of 1 Nm for the screws.
Summary of Contents for FB LE Series
Page 2: ......
Page 13: ...Technical data Technical changes reserved 11 FZ393N FZ394...