We reserve the right to make changes of a technical nature
63
univers Z internal system
7
univers Z internal system
7.1
Coding
The FWB, FWQ cabinet has been prepared for the installation of univers Z panels.
The univers Z panels use mounting rails made from profiled and galvanised steel plates with an L profile and
a depth of 26 mm.
26 mm
Cross section of a univers Z mounting rail
The device mounting rails (DIN rails) are made from galvanised steel plates and ordered above each other
every 125 mm and 150 mm respectively.
The grid dimension of the internal panels is 250 mm in width and 150 mm in height, as in the univers system.
The panel dimensions result from the combination of 2 digits:
Height (mm)
Digit 1
450
3
600
4
750
5
900
6
1050
7
1200
8
Width (mm)
Digit 2
250
1
500
2
750
3
1000
4
Example: The width of the UW51V panel is 750 mm and its width is 250 mm
Panels are locked with the univers Z fixation towers
UZ03A1
as a standard.
(See chapter 7.3.2, Fixation towers, page 69)
To determine FWB and FWQ cabinet dimensions (height, width), 2 x 25 mm have to be added to the grid
dimensions of panels (the side panel thickness and/or top and bottom part thickness of the cabinet enclosure
measure 25 mm). For example, a FWB52 cabinet can comprise two UW51V panels (grid dimensions 750 x 500);
its dimensions are 800 x 550 mm.
