Assembling the body/wall cabinet
60
Technical changes reserved
5.3.3
Using the plaster guard
As standard, a full-size plaster guard made of reinforced corrugated paper is
included in the scope of delivery of the FWU field distributor.
After installing the wall cabinet in the wall, fold back the plaster guard along the
perforated line on each edge, and insert into the wall cabinet up to the stop.
Plaster guard with perforated lines for folding back
In the centre of the plaster guard there are two round pre-punched holes. These
can be used to manually remove it after plastering.
Plaster guard inserted into the wall
cabinet with pre-punched holes
Note
The front of the plaster guard has a water-repellent coating which is why it must
always be inserted into to the wall opening as the face. The back of the plaster
guard can be recognised by the pre-stamped product number and the “RESY”
recycling symbol.
Product number
Recycling symbol
