Accessories for interior fittings
96
Technical changes reserved
7.2.3
Flange VZ741 for rear cable entry
The rear cable entry can be closed using the dust-tight flange VZ741. To do so,
the rear cable entry in the plastic head/foot section must be fully cut out (before
installing the enclosure in the wall).
Cable entry flange VZ741, IP41
Dust-tight flange VZ741 mounted on the
rear of the enclosure
7.2.4
Cable entry slider FWU00P1
The top/bottom cable entry plate can be ordered as a replacement part via
product code FWU00P1.
Cable entry slider FWU00P1,
with round pre-punches for cable conduit
This cable entry plate (also known as a slider), is clicked into place laterally in the
head/foot section of the wall cabinet. After removing the slider, thick conduits
can be inserted into the wall cabinet from the front. The slider also makes it
easier to align the wall cabinet in a hollow wall above existing cables and
conduits.