JK11254D
Invicta 3
Instruction leaflet for fitting a 4 pole direct connection kit
Locate and clip the 4 x KR125U
(A)
connectors onto the DIN rail
(B).
Fit phase and neutral links
as shown. Fit neutral and phase links to busbar at fixing points
(C)
. Ensure these connections
are tightened to
5Nm
.
Connect the incoming cables at fixing points
(D)
, ensuring these connections are tightened to
3.5Nm
Remove the left side cutout from the main incomer shroud
(E)
and fit to the pan assembly with
the fixing points
(F)
(A)
(C) 5Nm
(D)
3.5Nm
(B)
8mm
(E)
(F)
