RTN300X · RTN301X
Quick start configuration
After calling up the Web inter-
face, select the "Quick start"
area and log in with the factory
Password:
1234
into the IP door speaker
module.
NOTE:
There are also other basic
settings in the "Quick start"
area (e.g. volume and micro-
phone sensitivity).
In the "Expert" area in this in-
stallation variant, no settings
need to be made.
Quick start configuration with IP intercom server RTD110X
Configure the door speaker
module (with multiple inputs)
at the correct entrance and the
number of call buttons used.
Confirm your settings with
"Save".
IP address, SIP registration
data and call button inputs for
the door speaker module are
now adapted to the configura-
tion defined in the IP intercom
server.
IMPORTANT:
In general, no further settings
will be necessary. For more in-
formation, please see the cur-
rent
Easy Installation Guide
and, for special settings, the
IP
system manual.
The quick start area is specifically adapted to the subnet configuration of the IP intercom server.
The components in the subnet should not be changed except for the changes described here.
English
Subject to technical changes
17
www.hager.com
!
!
Summary of Contents for RTN300X
Page 42: ...42 www hager com...
Page 43: ...43 www hager com...
