Date : 20/09/2012
6T 8207-02a
tebis touch panel User Manual
CUSTOMISATION
24
- In the 'Configuration Menu', select: Touch screen
calibration.
A program is started, which invites you to calibrate the
screen by clicking on the cross.
Message: Carefully press and briefly hold stylus on the
centre of the target.
Repeat as the target moves around the screen.
After calibration, touch the screen to save the new
configuration.
Otherwise, wait 30 seconds to keep the previous settings.
3.3.10 Physical address
Used to set the time zone and activate summer/winter mode.
- In the 'Configuration Menu', select: Physical address.
- Click on
to activate the physical address.
- From the ETS program, in the topology for your project,
select your tebis touch panel.
- By right-clicking on the mouse, select Download followed
by Program Individ. Address.
Programming is complete when the tebis touch panel
displays the new physical address.
- Click on
to exit the menu.
Comment: After programming the new physical address, the addressing mode is automatically deactivated.
3.3.11 Return to factory settings
Is used to reset the configuration of the tebis touch panel to restore the default parameters.
-
In the 'Configuration Menu', select: Return to factory settings
-
Click on ‘YES’ to confirm your choice or ‘NO’ to go back to the menu.
The system will reload the ex works configuration and reboot.
Comment: Your application and the password to access the parameters and configuration menus will be deleted.
Carefully press and briefly hold stylus on the center of the target.
Repeat as the target move around the screen.
