background image

1

6T 7299-00b

6T 7299-00b

TR351

§

Unidirectional radio input
concentrator 

User instructions

TX100 in "Prog", "Num" or "Visu" mode: the channel number
displayed on the concentrator is not yet numbered on the 
TX100

Combination

OFF

OFF

ON

ON

OFF

OFF

ON

ON

Flashes

OFF

The TR351 concentrators increase the number
of unidirectional radio products in a combined
system (radio/wire-based) by grouping 
together the inputs that perform the same
function. The TR351 concentrators are
equivalent to 24- or 32-channel input modules,
depending on the type of
system (TX100 or ETS). They are part of the
Tebis installation system.

Configuration

TX100 V1.7.0 or later: a description  
can be obtained from the manufacturer.

ETS : application software TL351 : 
the database and description can be 
obtained from the manufacturer.

Functions

24 channels available in the TX100   
configuration.

32 channels available in the ETS 
configuration.

Maximum concentration of 24 radio inputs  
per channel.

View of status by 2x8 segment display.

Possibility to restore the factory settings 
for the product.

Possibility of deleting links created from the 
product.

The precise functions of these products 
depend on the configuration and settings.

Wiring and start-up

Remove flap 

’

using a screwdriver and

connect the product to the bus.

Technical characteristics

Supply voltage

30V DC

Dimensions

203 x 77 x 26,5 mm

Degree of protection

IP 30

Operating temperature

0 °C —> + 45 °C

Storage temperature

- 20 °C —> + 70 °C

Receiver class

EN 50428

Transmission frequency

868.3 MHz

Display

The table below shows the product status according to LEDs 



and 

Œ

and the display 

‘

.

*

: Display only visible when programmed by the TX100.

**

: Display only visible when programmed by the ETS3.

10

9

*

7

*

6

5

3

1

2

*

8

4

LED 



LED 

Œ

Display 

‘

Description

14

13

11

12

**

15

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

ON

ON

ON

OFF

OFF

Flashes

ON

OFF

OFF

OFF

OFF

OFF

Factory return of the TR351 is in progress 

Deleting all the radio inputs stored in the TR351.
This takes at least 5 seconds

TX100 in "Prog", "Num" or "Visu" mode: the input selected on
the TX100 is not connected to the concentrator

TX100 in "Prog", "Num" or "Visu" mode: 
the input selected on the TX100 is linked to the concentrator

TR351 in "Delete links" mode: 
delete all the links with the selected channel

TR351 in "Create links" mode: 
the next activated radio input will be linked to the number 
displayed

TR351 in "Create links" mode: 
store the current link

TR351 in "Delete links" mode: 
the link between the next radio input and the displayed 
number will be deleted

TR351 in "Delete links" mode: 
delete the current link

Normal mode

A unidirectional radio input linked to the TR351 with a low bat-
tery level has sent a telegram

TR351 in "Visu" mode: "Visu" mode is active

TR351 in physical address mode

TR351 in ETS radio learning mode

Functions available in the Normal
and Display modes:

Physical addresses:

1

.

Enter the “Physical address” mode:  
combination 

C

2

.

Exit the “Physical address” mode:  
combination 

C

Associate a radio input with a channel:

1

.

Enter the "Create links" mode: 
combination 

D

2

.

Select the channel:  
combination(s) 

A

and/or combination(s) 

until the required channel is displayed

3

.

Briefly activate the radio input to be linked

4

.

Exit the “Create links” mode:  
combination 

D

Delete radio links associated with a 
channel:

1

.

Enter the “Delete links” mode: 
combination 

E

2

.

Select the channel: combination(s) 

and/ 

or combination(s) 

B

until the required 

channel appears

3

.

Briefly activate the radio input to be deleted

4

.

Exit the “Delete links” mode:  
combination 

E

Delete all the radio links associated with a  
channel:

1

.

Enter the “Delete links” mode:  
combination 

E

2

.

Select the channel: combination(s) 

A

and/

or combination(s) 

B

until the required 

channel appears

3

.

Delete all the radio links:
combination 

F

4

.

Exit the “Delete links" mode:  
combination 

E

Delete all the radio links stored in the 
TR351: 

Delete all the radio links: combination 

F

Reset the TR351:

Reset the TR351: combination 

G

Display the channel(s) associated with a 
radio input: 

1

.

Enter in “Visu" mode: combination 

or

B

2

.

Briefly activate the radio input several times
in order to view all of the channels with 
which it is linked.

Keys 



and 

Ž

The table below shows the changes in product 
status according to the type and the combinations
of 

the and buttons:

A

Press 

C

Press 

D

Press and hold 

E

/

F

Press and hold 

G

Long press and

hold 

B

/

/

Press 

/

Press and hold 

Press and hold 

Long press and

hold 

Press 

Press and hold

10 sec

2 sec

Press

Long press and hold

Length of pressure on the keys

Caution:

-

This device must be installed only 
by a qualified electrician.

- Not to be installed outside. 

Reference

TU204A

≥ 12.6

TU224A

≥ 10.6

TR302A

≥ 10.6

TR304A

≥ 12.6

TR302B

≥ 10.6

TR304B

≥ 12.6

TU208A

≥ 14.6

Compatibility

It is necessary to respect the following
restrictions for an optimal use of TR351

Datecode

TD100

≥ 11.6

TD110

≥ 11.6

TD111

≥ 12.6

TD200

≥ 12.6

TD101

≥ 13.6

TD201

≥ 19.6

TD211

≥ 14.6

TD300

≥ 10.6

TD301

≥ 13.6

TD210

≥ 14.6

TD310

≥ 13.6

TD250

≥ 19.6

TD251

≥ 10.6

TK301

≥ 35.6

TD311

≥ 14.6

TK302

≥ 35.6

4

3

7

5

1

6

2

BUS

Hereby, hager Controls, declares that this unidirectional
radio input concentrator is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.

The CE declaration can be consulted on the site :

www.hagergroup.net 

Usable in all Europe 

RF

tebis

TP

Bus

30 V

230V~

°

§

Summary of Contents for TR351








Reviews: