x
IV.
PREPARING TO OPERATE
ATTACHING CUTTERS CONTINUED
ATTACHING EQUIPMENT CONTINUED
FIG 4.25
front
TWO-HEAD SERIES
Blade Rotation Right of Operator
Hydraulic hoses on cutter heads should
be hooked up so blades on heads mounted
right of operator rotate according to figure 4.25
and figure 4.26 (clockwise from above). Refer
to 204 DETASSELER Parts Manual for correct
hardware, hose lengths, and hydraulic sche-
matic.
1
FIG 4.26
front
front
THREE-HEAD SERIES
NOTE:
Care should be taken when installing check
valve (fig. 4.25, item 1) on cutter motor so
the flow arrow is oriented correctly (either
two-head or three-head series).
IMPORTANT:
Case drain hoses must be installed
correctly on cutter motors to prevent
motor damage. Refer to parts manual.
Summary of Contents for 204
Page 133: ...x IX TROUBLE SHOOTING TASSELTROL LS SYSTEM ELECTRICAL CONTINUED FIG 9 1 1 2...
Page 134: ...x IX TROUBLE SHOOTING NOTES...
Page 140: ...138 NOTES...
Page 141: ...x...