V.
OPERATING INFORMATION
HYDROSTATIC SYSTEM CONTINUED
HYDROSTATIC SYSTEM CONTINUED
Traction Valve
The Model 204 detasseler comes equipped with special
hydraulic valves for increased traction (one in the front
hydraulic loop and one in the rear hydraulic loop). These
valves greatly reduce spin-out if muddy conditions prevail, or
if wheels lose traction for any reason. The valve in the rear
loop is active at all times. The valve in the front loop (fig 5.12)
is activated by a switch on the floor in front of the operator’s
seat (fig 5.11). When the traction valve is activated an
indicator on the instrument panel will light up (fig. 5.13).
NOTE:
To prevent hydraulic loop damage, do not operate
the front traction valve continuously. Activate the
front traction valve only when needed. Shut the
traction valve switch off when clear of problem area.
x
FIG 5.11
FIG 5.13
FIG 5.12
Summary of Contents for 204
Page 133: ...x IX TROUBLE SHOOTING TASSELTROL LS SYSTEM ELECTRICAL CONTINUED FIG 9 1 1 2...
Page 134: ...x IX TROUBLE SHOOTING NOTES...
Page 140: ...138 NOTES...
Page 141: ...x...
