IV.
OPERATING SYSTEMS
22
TURN SIGNALS–
To activate the front turn signals
(fig. 22-3) and the rear turn signals (fig. 22-4 and 5), move
the turn signal lever (fig. 21-2, item E) forward, away from
the operator, to signal a right turn and back, toward the op-
erator, to signal a left turn. Steering column– mounted turn
signal indicators will correspondingly flash when either turn
signal is activated. The turn signal switch is not a self– cen-
tering switch; you must return it to the “OFF” position by
hand after completing your
turn.
FIG. 22-4
FIG. 22-5
HIGHWAY LIGHTS/RUNNING LIGHTS–
The high-
way lights are mounted on the cab and the either side of the
transom (fig. 22-1). Use these trapezoid head lamps when
traveling on a public
road at night. Turn
them on using the
highway/running light
switch located on the
front console (fig. 22-1, item B).
Activating the highway lights will also turn on the “red” running lights
on the rear of the machine (fig. 22-2).
The ignition key does not have to be on to operate these lights.
FIG. 22-2
A. CAB
FIG. 22-3
FIG. 22-1
OPERATING SYSTEMS
