Most accidents occur as the result of failure to
follow simple and fundamental safety rules. For this
reason, most accidents can be prevented by
recognizing the real cause and doing something
about it before the accident occurs.
Many
conditions
cannot
be
completely
safeguarded against without interfering with
efficient operation and/or reasonable accessibility.
Therefore, you must study this Operator’s Manual
1
SAFETY PRECAUTIONS
and learn how to use the sprayer controls for safe
operation. Likewise, do not let anyone operate
without instruction.
Do
not
make
modifications
such
as
weldments, add-ons, adaptations, or changes from
the original design of sprayer. Such changes and/
or modifications may become safety hazards to
you and to others and will void all warranties.
SAFETY/ DECALS
I.
SAFETY/DECALS
DRIVING
•
Before moving sprayer, make sure no persons or obstructions are in path of travel.
•
Do not permit passengers on sprayer when it is moving; they may fall off or obstruct operator’s
view.
•
Never drive near ditches, embankments, holes, mounds, or other obstacles.
•
Never drive on hills too steep for safe operation.
•
Always drive at a reasonable field speed.
•
Reduce sprayer’s speed before turning.
•
Come to a complete stop before reversing direction.
•
Pull over to side of road before stopping.
•
Additional weight caused from partially full or full solution tanks may cause erratic or increased
stopping distance.
•
Never operate sprayer on roadway with any solution in solution tank.
•
Do not activate parking brake while machine is in motion or damage may occur to machine.
•
Use flashing/hazard warning lights when traveling on public roads, day or night, unless
prohibited by local law.
•
Make sure SMV and SIS emblem is in place and visible from rear when traveling on public
roads.
