7-37
SECTION 7 –
SPRAY SYSTEMS
Visit
www.teejet.com
for further
information.
Section Strainers
-If Equipped
(80-Mesh Strainer Screens)
Section Strainers are located throughout
each boom section and filter impurities to aid
in the avoidance of spray nozzle buildup.
Refer to “Service - Filters” provided in the
Maintenance and Storage Section
elsewhere
in this manual for maintenance information.
Solution Line Strainer
(50-Mesh Strainer Screen)
A Solution Line Strainer is located
beneath the center right-hand side of
machine and is the main strainer to filter
solution system impurities and maintain
consistent application rates.
Refer to “Service - Filters” provided in the
Maintenance and Storage Section
elsewhere
in this manual for maintenance information.
SOLUTION SYSTEM -
OPERATION
Nozzle Body
(Located throughout boom)
-Typical View
Section Strainers
(Located throughout each boom section)
-Typical View
NOTICE
The Solution System has been tested
using RV-type antifreeze. Fill solution
tank with fresh water and drain before
initial use.
Solution Line Strainer
(Located beneath the center
right-hand side of machine)
-Typical View
Summary of Contents for STS 10
Page 290: ......
