8-9
SECTION 8 –
MAINTENANCE AND STORAGE
DO NOT fill fuel tank completely. Fuel can
expand and run over. Wipe up all spilled fuel
and clean with detergent and water before
starting the engine.
Capacity
•
Fuel Tank Capacity = 135 gal. (511 L)
Type
Tier 4 Final Engines
•
Ultra-Low Sulfur Diesel (ULSD) fuel
required.
Tier 3 Engines
(Export only)
•
No. 2 diesel fuel recommended.
(In operating conditions less than 32° F.,
use a blend of No. 1 and No. 2 diesel
fuel).
NOTE: The addition of No. 1 diesel fuel may
cause loss of power and/or fuel
economy.
Filling the Fuel Tank
1. Shut the engine off.
2. Remove Fuel Fill Cap and set aside.
3. Fill tank to desired level.
4. Reinstall the Fuel Fill Cap.
Air Conditioning
Recharging the AC System
The cab is equipped with an R-134A Air
Conditioning System.
Recharge system
with R-134A refrigerant only.
NOTE: Confirm refrigerant before
recharging the Air Conditioning
System. If your system is mistakenly
recharged with R-12 refrigerant,
machine damage (such as
compressor seizure) may result.
If you do not have the proper
equipment, it is recommended that
you allow an authorized service
technician service your Air
Conditioning System.
Engine Fuel Fill
(Located on top of fuel tank
on right-hand side of machine)
-Typical View
• Fuel Fill
Cap
NOTICE
Charge with R-134A only. Charge to
4.00 lbs.
DO NOT MIX REFRIGERANTS
A/C Charge Ports
(Located beneath mid mainframe)
-Typical View
Summary of Contents for STS 10
Page 290: ......
